Previous3-Axis Brushless Gimbal Frame With Motors & Storm32 ControllerNextRadioLink AT10 II 2.4Ghz 10CH RC Transmitter
Last updated
Upgrade to high-quality brushless PTZ control panel, chips are original chip, increase the supply anti-reverse polarity protection, counter-power to prevent customers from unintentional indirect cause significant damage
Original sensor chip, better accuracy, and change the sensor interface, the connection is more solid, easy to loose, iic error does not occur; Upgrade the roof, increasing the head hook hole, easy to use PTZ hook You can use the remote real-time control of pitch and roll angle Extended function: to set flip, installed on fixed wing; Handheld PTZ can be changed; (user to modify, we does not provide technical support) Can be upgraded to three PTZ (user to modify, we does not provide technical support)
Camera Weight Range: 60-100 grams sports cameras
Control: Can control pitch and roll via receiver or other independent PWM channels
Gimbal Control Angles: PITCH: -90° to +90° / ROLL: -45° to +45°
Available Colors: Black or Silver
Material: CNC Aluminum Alloy
Motor: Model 2208 kv80 Brushless Motor
Joystick Control Angles: PITCH (-90° to +90°) / ROLL (-45° to +45°)
Control Mode: Pitch/Roll
Applicable Range: 60-100 grams series sports cameras
Control Board: BGC3.0 Brushless Control Board
Software: BGC2.2
Mounting: GOPRO Camera Back Strap
Compatible Cameras: GOPRO3/3+/4, SJCAM, Hawkeye, Small Ant, and other cameras
Battery Connector Type: JST Plug / XH-2.54 Plug
Voltage: 12V/3CELL Lithium Polymer Battery
Compatible Models: DJI Phantom 1, 2, and other DIY drones
Product Weight: 170 grams
Package Dimensions: 125.0mm x 125.0mm x 105mm
Weight: 170g
Dimensions: 125.0mm x 125.0mm x 105mm
Remove the vibration dampening balls and open the top cover of the installation plate.
Mount the gimbal top plate to the bottom of the DJI Phantom, and tighten the screws.
Reinstall the vibration dampening balls.
Mount your GOPRO camera and secure it with the strap.
