3-Axis Brushless Gimbal Frame With Motors & Storm32 Controller

---

Product Link

3-Axis Brushless Gimbal Frame with Motors & ControllerOpenELAB

Introduction

3-Axis assembled Brushless Gimbal Frame With Motors & Storm32 Controlller for Gopro 3 4 for Xiaomi/SJCAM SJ4000 for FPV RC Drone

Specifications

• T brushless motor motor models: 2206/100:2, only 2805/100 t brushless motor: 1 only

• The driver board: STORM32BGC

• Firmware version: o323bgc - release - v090

• Hardware version: V130

• Working voltage: 3-4 s (11.1 to 16.8 V)

• Working current: 350 ma

• Joystick control Angle: PITCH: 25 + 25 degrees/ROLL: 25 + 25 degrees/YAW: + 90 degrees - 90 degrees.

• Switch control mode: lock/follow

• Size: 80 * 80 * 100 mm (L * W * H)

• Weight: 180 g

• Scope of application: for GOPRO series camera

• Electrical connections: JST and HX

Dimensions

• Dimensions: 80 * 80 * 100 mm (L * W * H)

• Weight: 180 g

How to Use

1. Remove vibration ball, open at the top of the mounting plate

2. Lock mounting plate with screws at the bottom of the craft

3. Install the damping ball

4. Install the camera, with a girdle bond compact camera.