Seeed Studio Wio Tracker 1110 Dev Board for Meshtastic


Description

Featuring a Wio Tracker 1110 Dev Board (based on Nordic nRF52840 for BLE, Semtech LR1110 for LoRa), Grove Air530 GPS Module, Grove0.96" OLED Display and native compatibility with Meshtastic firmware, it's a plug and play dev kit for you to build your low-power Meshtatstic tracker device.

Features

  • Easy Setup: Simply flash the firmware to experience the powerful features of the Meshtastic network.

  • Real-time Positioning: Equipped with a GPS (Air530) module, supporting high-precision GPS positioning.

  • Information Display: Features a Grove - OLED Display 0.96" screen for clear real-time data visualization.

  • Extensive Expansion Interfaces: Compatible with the Grove ecosystem, allowing easy expansion with more sensors and modules.

  • Open-source Hardware and Software: Supports secondary development and customization, providing rich development resources and Meshtastic community support.

Specification

General

Voltage - supply

5V (USB 2.0 Type-C)

Battery Connector

3.7V

Interface

RFIO

GNSS Antenna Connector* 1

LoRa Antenna Connector* 1

USB type-C

* 1

Grove Interface

ADC* 1I2C* 1UART* 1

Digital*3

Button

USER

Configurable button

RESET

Reset

Exterior FLASH Memory

4M

LoRa® and Positioning (Semtech LR1110)

LoRaWAN® Protocol

V1.0.4

Frequency Plan

863~928MHz

Sensitivity

-125dBm @125K/SF7

-141dBm @125K/SF12

Output Power

20dBm max @LoRa®

Positioning Technology

GNSS(GPS/BeiDou), WiFi Sniffer

Range

2~10km (Depends on antenna and environment)

Bluetooth(Nordic nRF52840)

Bluetooth

Bluetooth 5.3

Flash

1MB

RAM

256KB

Protocol

Bluetooth LE, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks

Output Power

6dBm max @Bluetooth

Onboard Sensors -- TH Sensor (SHT41)

Range

Accuracy

Temperature

-40~85°C

± 0.2°C

Humidity

0~100%RH

±1.8%RH

Onboard Sensors -- 3-Axis Accelerometer( Not used )

Range

±2g, 4g, 8g, 16g

Bandwidth

0\.5Hz ~ 625Hz

Sensitivity (LSB/g)

1000 (±2g) ~ 83 (±16g)

Grove - OLED Display 0.96 inch

Power Voltage (VCC)

3.3 / 5 V

Driver IC

SSD1308Z

Display Color

White

Dot Matrix

128×64

Panel Size

26.7(W)×19.26(H) mm

Active Area

21.74(W)×11.175 (H) mm

Dot Pitch

0.17(W)×0.175 (H) mm

Dot Size

0.15(W)×0.15 (H) mm

Wide range of operating temperature

-20~70 ℃

Get Started

Hardware Connection

Connect the Grove-GPS module to the UART port, and the Grove-OLED Display to the I2C port.

Configuration

Device Connection

Different connection types, find out which client is best for your type of connection.

  • Download the Meshtastic App.

  • Select the target device on the Bluetooth panel.

  • The display will show the name and PIN code

  • Enter the code and then click Pair to connect the device.

Parameters Configuration

In order to start communicating over the mesh, you must set your region. This setting controls which frequency range your device uses and should be set according to your regional location.

Region List

Refer to LoRa Region by Country for a more comprehensive list.

Region Code

Description

Frequency Range (MHz)

Duty Cycle (%)

Power Limit (dBm)

UNSET

Unset

N/A

N/A

N/A

US

United States

902.0 - 928.0

100

30

EU_433

European Union 433MHz

433.0 - 434.0

10

12

EU_868

European Union 868MHz

869.4 - 869.65

10

27

CN

China

470.0 - 510.0

100

19

JP

Japan

920.8 - 927.8

100

16

ANZ

Australia & New Zealand

915.0 - 928.0

100

30

KR

Korea

920.0 - 923.0

100

TW

Taiwan

920.0 - 925.0

100

27

RU

Russia

868.7 - 869.2

100

20

IN

India

865.0 - 867.0

100

30

NZ_865

New Zealand 865MHz

864.0 - 868.0

100

36

TH

Thailand

920.0 - 925.0

100

16

UA_433

Ukraine 433MHz

433.0 - 434.7

10

10

UA_868

Ukraine 868MHz

868.0 - 868.6

1

14

MY_433

Malaysia 433MHz

433.0 - 435.0

100

20

MY_919

Malaysia 919MHz

919.0 - 924.0

100

27

SG_923

Singapore 923MHz

917.0 - 925.0

100

20

LORA_24

2.4 GHz band worldwide

2400.0 - 2483.5

100

10

Now that you have set the LoRa region on your device, you can continue with configuring any additional configs to suit your needs.

Resource

Wio Tracker 1110 Dev Board v1.0_SCH

Meshtastic Doc

Github-Meshtastic Firmware

Enclosure File(3D-Print)

Enclosure File(Acrylic)

Last updated

Was this helpful?