EdgeBox Raspberry Pi IoT Edge Device 4GB RAM 32GB eMMC WiFi

---

Product Link

EdgeBox Raspberry Pi IoT Edge Device 4GB RAM 32GB eMMC WiFiOpenELAB

Introduction

The EdgeBox-RPI-200 series controllers offer versatile solutions for enhancing edge automation and industrial control. Compact yet powerful, they support real-time operations and multi-process control for various industrial applications,serving as PLC, IIoT Gateway, OPC UA Server, and Industry PC.

For a detailed comparison and to find the best fit for your projects, you can check our EdgeBox Series Comparision Table, or directly email us at [e-mail].

Features

• All-in-one IIoT Edge Gateway

More than just a PLC, PAC, also an IoT edge Gateway, edge computing controller and Industry PC.

• Powerful and Flexible Processors

Powered by Raspberry Pi CM4, equipped up to 8GB RAM and 32GB eMMC

• Multiple Communication Capabilities

Support multiple industrial iot protocols and standards on phoenix connector and a RJ45 Gigabit Ethernet; Carry full-featured wireless interconnectivity with both cecullar and LoRa, supported by AWS, Azure cloud services

• Rugged Industrial-grade Hardware Design

Integrated thermal management with full Aluminum heatsink enclosure, supporting 35mm DIN rail and wall mounting

• Supported with Rich Industrial Software Ecosystem

Support rich industrial platforms and also fleet management, including Codesys, N3uron, balena, Node Red, Ignition and etc.

Specifications

Parameter	Description
Basic
CPU	Raspberry Pi CM4, Quad-core Cortex-A72@ 1.5GHz
RAM	1GB/2GB/4GB/8GB
eMMC	Lite/8GB/16GB/32GB
Operating System	Raspbian, Debian
Wireless
WiFi	2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac equipped*
Bluetooth	Bluetooth 5.0, BLE equipped*
Cellular	Mini-PCIe support 4G LTE(Quectel EC20/EC25 tested)*
LoRa®	Mini-PCIe support LoRaWAN®
Interface
Ethernet	1 x 1000M RJ45
HDMI	HDMI 2.0 up to 4k@60fps
USB	2 x USB2.0 A
RS Serial	1 x RS485 (isolated)
1 x RS232
M.2 socket	2242 NVME SSD card
DI	2 x isolated DI ports
Input Voltage: 24V DC; Current: 1000mA
DO	2 x isolated DO ports
Output voltage: <60 V; Current: 500 mA
Extra features
Power Supply	DC 12V - 36V
RTC	RTC
Watchdog Timer	Stand alone
Encryption Chip	ATECC608A*
Uninterrupted Power Supply	UPS*
Operation temperature	-20 ~ 60 °C
Certification	RoHS, CE, FCC, TELEC, UKCA

Pinout

Dimensions

124mm x 76mm x 35mm

FAQ

How can I get started with EdgeBox?

Edgeboxes, pre-loaded with Debian Buster, can be powered up with HDMI and ethernet for first boot. Also you can access it remotely with SSH for initial configuration without a monitor. Once set up, switch to VNC for a graphical interface.

What kinds of 4G and LoRa modules can I use?

You can input Quectel EC20/EC25 module for 4G LTE usage.

You can use Seeed WM1302 module for LoRaWAN® applications.

Can I use 4G and LoRa at the same time?

Sorry, this box does not support 4G and LoRa® use at the same time.

How to reflash OS?

When you need to install your preferred OS, you will need some additional hardware to burn it. Remove the CM4 from the Edge box and place it on the Dual Gigabit Ethernet Carrier Board to burn your OS. Then, remount the CM4

What are the software we can communicate with external world ?

The Edge box is an open-source hardware solution for industries. It supports protocols such as RS485, RS282 Modbus, Ethernet/IP, TCP/IP, and wireless networks. Therefore, you can interact with the external world using third-party software such as Codesys, Node-RED, N3uron, and Ignition Edge, as well as cloud services like AWS and Azure.

Discover our range of edge devices powered by Raspberry Pi, including all-in-one edge computing controllers and versatile HMIs. They are open source and adaptable to your specific requirements. Explore the complete series of Raspberry Pi-based edge devices today.