Last updated
The 10.1HP-CAPLCD Monitor is a small, high-resolution, wide-color gamut general-purpose capacitive touch monitor compatible with most standard HDMI devices. Comes with an aluminum alloy case, toughed glass panel, excellent display performance, and smooth multi-touch effect.
10.1-inch wide color gamut IPS panel, 1280 x 800 hardware resolution.
Supports standard HDMI and full-featured Type-C display signals
10-point capacitive touch, toughened glass panel with 6H hardness.
Adopts optical bonding technique for better display.
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
Multi-language OSD menu support (for power control, adjusting brightness/contrast, etc.)
Supports HDMI/Type-C audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.
•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device. •Note 2: The input current should be ≥750mA, otherwise it will lead to start-up failure or abnormal display, and a long time in an abnormal state may cause permanent damage to the device. •Note 3: Please do not put the display in a high temperature and high humidity storage environment for a long time, the display needs to work within the limit value, otherwise it will be possible to damage the display.
If the system of the main control board can automatically identify the EDID for display, there is no need to set the relevant timing parameters additionally.
Otherwise, you can refer to the following EDID settings:
How to Use
Connect the Touch port of the LCD to the USB interface of the PC, and Windows will automatically identify the touch function.
Connect the LCD's HDMI interface to the PC's HDMI interface, and Windows will automatically identify the display function.
Note:
Some PCs do not support HDMI devices plug-and-play, usually after rebooting the system can be used normally.
If the power supply of the USB interface is insufficient, the LCD will flicker, after connecting the external 5V 1A power adapter to the LCD's Power interface, it can be restored to normal use.
1. Download and install DDC/CI applications, such as the open-source Twinkle Tray.
2. Open the software dimming icon, it will recognize the Waveshare monitor and adjust the monitor backlight brightness by sliding the scroll bar.
3. You can also enter the DDC/CI application settings screen to enable contrast adjustment, volume adjustment, and other functions.
Take Windows 10 as an example:
1. Enter the Windows setting of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):
2. Click "Setup" in the pop-up "Tablet PC Settings" interface:
3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.
【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)
Connect the Touch port to the USB interface of the Raspberry Pi.
Connect the HDMI interface to the HDMI interface of the Raspberry Pi.
1. Please download the newest image from the Official Raspberry Pi website. 2. Download the compressed file on the PC and unzip it to get the .img file. 3. Connect the TF card to the PC and use SDFormatter to format the TF card. 4. Open Win32DiskImager, choose the image prepared in the first step, and click "Write" to program the system image. 5. After programming, open the config.txt file in the root directory of the TF card and enter the following codes at the end of config.txt. Then, save and safely eject the TF card.
6. Insert the TF card into the Raspberry Pi, power up the Raspberry Pi, wait for a few seconds normally and then it will display normally.
Using the DDC/CI program, here is an example of the ddcutil tool.
For more information about ddcutil function commands, please check http://www.ddcutil.com/commands/.
Using the matching dual-plug Type-C cable, connect the monitor's DISPLAY&TOUCH connector to the master's full-featured Type-C connector. Wait for a few seconds to enter the display interface. Note: Please make sure your main control supports a full-featured Type-C interface and your phone needs to support the wired projection function.
Item | Description | Unit |
---|---|---|
Parameter | Min. Value | Standard Value | Max. Value | Unit | Note |
---|---|---|---|---|---|
Pixel Clock | H Addressable | H Blanking | V Addressable | V Blanking | H Front Porch | H Sync Width | V Front Porch | V Sync Width | H Image Size | V Image Size | H Border | V Border |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Model
10.1HP-CAPLCD Monitor
/
Dimensions
10.1
Inch
Viewing Angle
178
Deg
Resolution
1280 x 800
Pixels
Overall Dimensions
241.00(H) × 149.00(V) × 11.80(D)
mm
Display Dimensions
228.6(H) × 143.0(V)
mm
Display Area
135.36(H) × 216.58(V)
mm
Pixel Pitch
0.1175(H) x 0.1088(V)
mm
Color Gamut
82%
NTSC
Max. Brightness
350
cd/m²
Contrast
800:1
/
Backlight Adjustment
OSD Menu
/
Refreshing Rate
60
Hz
Display Interface
Standard HDMI Interface
/
Power Port
5V Type-C
/
Power Consumption
4
Watt
Weight
809
g
Input Voltage
4.75
5.00
5.25
V
Note 1
Input Current
750
800
TBD
mA
Note 2
Operating Temperature
0
25
60
℃
Note 3
Storage Temperature
-10
25
70
℃
Note 3
77.00
1280
232
800
56
160
32
20
6
294
165
0
0