M5Stack ATOMS3R Proto Kit
M5Stack ATOMS3R Proto Kit
Last updated
M5Stack ATOMS3R Proto Kit
Last updated
AtomS3R Ext is a prototype development expansion programmable controller based on the ESP32-S3 main controller, designed specifically for prototype validation and expansion development. It features a Universal expansion plate on top, allowing users to connect and debug multiple IO ports, making it suitable for various peripheral module expansions and function validation. The device integrates the ESP32-S3-PICO-1-N8R8 main controller, supports WiFi functionality, and includes 8MB onboard FLASH and 8MB PSRAM, along with a power circuit that converts 5V to 3.3V/2.8V/1.2V. It also has a built-in three-axis BMM150 geomagnetic sensor and a six-axis BMI270 motion sensor. The controller is equipped with a Type-C interface for power supply and firmware downloads, as well as an HY2.0-4P expansion port, six GPIO, and power pins for easy functionality expansion. Compared to previous ATOM series host products, the AtomS3R Ext features an enhanced 3D antenna, providing better signal performance and stability. Measuring only 24x24x12mm, it is highly suitable for prototype development and validation applications in embedded smart devices.
Download Mode To flash the firmware, press and hold the reset button (for about 2 seconds) until the internal green LED lights up, then release the button. The device will enter download mode and is ready for flashing.
Integrated ESP32-S3-PICO-1-N8R8 main controller
Nine-axis sensor system (BMI270 six-axis + BMM150 three-axis geomagnetic sensor)
8MB Flash and 8MB PSRAM
Supports infrared emission control
Expandable pins and interfaces
Breadboard
Development platforms: Arduino, UIFlow, MicroPython
Motion detection and directional awareness
Wearable devices
Smart device control
IoT applications
BMM150 & BMI270 & IR
Proto Pin
Specification | Parameter |
---|---|
ESP32-S3-PICO-1-N8R8 | G0 | G45 | BMI270_ASDx | BMI270_ASCx | G47 |
---|---|---|---|---|---|
Proto Board | ESP32-S3-PICO-1-N8R8 |
---|---|
SoC
ESP32-S3-PICO-1-N8R8 @ Dual-core Xtensa LX7 processor, up to 240MHz @ USB-OTG
PSRAM
8M PSRAM
FLASH
8M FLASH
Six-axis Motion Sensor (BMI270)
Accuracy: 0.05% (acceleration), 0.05°/s (angular velocity) I2C address: 0x68
Three-axis Geomagnetic Sensor (BMM150)
Accuracy: 0.3 μT Mounted on BMI270, obtaining magnetometer data via BMI270
Infrared IR
IR emission distance at ∠180°: 12.46m IR emission distance at ∠90°: 1.45m IR emission distance at ∠45°: 3.88m
Sleep Current
GPIO-5V power supply: DC5V@11.63 uA Grove-5V power supply: DC5V@10.75 uA USB-5V power supply: DC5V@92.50 uA (including PD resistor loss)
Universal Expansion Board Size
5*6@2.54mm
Reserved GPIO
G5/G6/G7/G8/G38/G39
Breadboard Reserved GPIO
G3/G4/G9/G10/G11/G12/G13/G14/G17/G21/G40/G42/G46/G48
Operating Temperature
0°C ~ 40°C
Product Dimensions
24*24*12.9mm
Package Dimensions
85*65.5*13mm
Product Weight
34.5g
Package Weight
68.5g
BMI270
SYS_SCL
SYS_SDA
BMM150
A_SDA
A_SCL
IR
IR_LED_DRV
1
3.3V
2
1.2V
3
2.8V
4
RST
5
G3
6
G4
7
G9
8
G10
9
G11
10
G12
11
G13
12
G17
13
G21
14
G40
15
G42
16
G46
17
G48
18
GND
19
GND