Last updated
PoESP32 Unit is an ESP32 lan Ethernet Unit supports PoE (Power Over Ethernet). This module adopts ESP32 as built-in MCU, and IP101G as physical layer transceiver. Default firmware with ESP-AT, supports TCP,MQTT, HTTP protocols. It can connect to server with simple AT commands through serial port, achieving data transmission and remote control functions. This module simplify wiring and saves labor cost with PoE power supply, and It reserves the ability for secondary development to meet your requirement.
Embedded ESP32 main controller
PHY solution:
Transceiver model IP101G
IEEE 802.3/802.3u standard
Ethernet Interface.
PoE standard: PoE IEEE802.3 AF / Support maximum load power 6W
RJ45 network port 10/100Mbps
Communication / download interface:
Default firmware is ESP-AT / Support secondary development to implement TCP Client/HTTP/CoAP and other protocols
Programmable / support secondary development, reserve program download interface
Power supply.
HY2.0-4P interface 5V DC power supply
PoE power supply (PoE IEEE802.3 AF)
Development method.
AT command, UART: 9600bps default
Development Platform: UIFlow(coming soon), Arduino, ESP-IDF
Ethernet Controller
TCP Client data passthrough
ESP32-WROOM-32U
240MHz dual core, 600 DMIPS, 520KB SRAM (without integrated 3D antenna, does not support WiFi wireless function)
Flash
4MB
PHY
IP101G: IEEE 802.3/802.3u
MAC-PHY Interface Type
RMII
PoE Specifications
PoE IEEE802.3 AF Specifications / Maximum Power 6W / Voltage DC 37-57V
Ethernet Interface Specifications
RJ45 10/100Mbps
Reserved interface
1x HY2.0-4P interface, 1x program download interface
Communication interface
UART 9600bps 8N1 AT command control
Communication logic level
3.3V
Net Weight
26.2g
Gross Weight
32.8g
Product size
72 * 26 * 19.2mm
Packing Size
75 * 36 * 20.5mm
IP101G (ETH_ADDR = 1)
TX_EN
G21
TX0
G19
TX1
G22
RX0
G25
RX1
G26
CRS_DV
G27
MDC
G23
MDIO
G18
HY2.0-4P
M5CORE
G16
G17
