HELTEC WiFi LoRa ESP32 SX1262 LoRa Node Meshtastic LoRaWAN 868Mhz V2


Description

WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP32 + SX127x, it has Wi-Fi, BLE, LoRa functions, Li-Po battery management system and 0.96 OLED. It’s the best choice for smart cities, smart farms, smart home, and IoT makers.

Feature

  • Microprocessor: ESP32(dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278.

  • Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.

  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).

  • Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.

  • Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use.

  • Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.

  • Support the Arduino development environment.

  • With good RF circuit design and basic low-power design(sleep current ≤ 800uA).

Specification

Parameters

Description

Master Chip

ESP32 (240MHz Tensilica LX6 dual-core+1 ULP, 600 DMIPS)

LoRa Node Chip

SX1276/SX1278

USB to Serial Chip

CP2102

Frequency

470~510MHz, 863~923MHz

Max. TX Power

19±1dBm

Receiving sensitivity

-135dBm

Wi-Fi

802.11 b/g/n, up to 150Mbps

Bluetooth

Bluetooth V4.2 BR/EDR and Bluetooth LE specification

Hardware Resource

22*GPIO; 3*UART; 2*I2C; 2*SPI;

Memory

520KB internal SRAM; 8MB Spi Flash

Interface

Micro USB x 1; LoRa ANT(IPEX1.0); 2*18*2.54 Header Pin

Battery

3.7V lithium (SH1.25 x 2 socket)

Operating Temperature

-20 ~ 70 ℃

Dimensions

51 * 25.5* 10.6 mm

Pin Map

The power supply, firmware download, and debugging interfaces adopt a more universal USB Type C interface, making development work more convenient.

Resource

FAQ

1

Can the onboard 2.4GHz antenna be replaced?

The 2.4GHz antenna is a spring antenna, and there is no additional interface on the board for 2.4GHz wireless signals.

2

Can ESP32’s WiFi and Bluetooth be used at the same time?

No, the WiFi LoRa 32 don’t have an external PSRAM, if your application need use Bluetooth and Wi-Fi at the same time, you can look into this product: Heltec Wireless Bridge.

3

What development methods does it support?

  • Arduino

  • Micro Python

  • Platform.io

  • Espressif IDE

We strongly recommend using Arduino. We have complete technical support and provide complete LoRaWAN code for ESP32 Arduino framework.

4

What’s the battery socket type?

You can find this type of socket by search “SH1.25 x 2”.

5

Can I order a version without the OLED display?

Of course, you can contact our sales staff and provide your ideas.

6

Is V2 code compatible with V3?

No, the MCU is different.

Last updated

Was this helpful?